GPS Tracker for Personal Remote Positioning Tracker with Monitoring

Working Based on existing GSM/GPRS and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS

1 Summary function

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS.

2 Application

l        Vehicle rental / Fleet management etc

l        Provide peace-of-mind for businessmen

l        Manage personnel and vehicle

3 Hardware Description

 

3 Side face 

4 Bottom face

Content	Specs.
Dim.	85mm x 62mm x 25mm
Weight	133g
Network	GSM/GPRS/GPS
Band	850/900/1800/1900 Mhz
GPS chip	SIRF3 chip
GPS sensitivity	-159dBm
GPS accuracy	5m
Time To First Fix	Cold status 45s Warm status 35s Hot status 1s
Work voltage	DC9V—30V
Battery	3.7V 110mAh
Standby	<50mA
Storage Temp.	-40°C to +85°C
Operation Temp.	-20°C to +70°C
Humidity	5%--95%RH

5.1 Install Wire Box

 

GPS/GSM/GPRS tracker should be installed by technical professional of local service centre. Without permission, the user can’t repair and move the tracker randomly. If users do, any unfortunate damage should be compensated by himself.

 

5.1.1 Power supply line

The red wire connects 12V“+”;Black wire connects to12V“-”

 

5.1.2 Emergency triggering alarm

 

The blue wire(NO.6) connects the anode of the alarm button, and the black wire(NO.8) connects the cathode of the alarm button.

5.2 SIM card installation

Make sure that there are no call transfer, call display is on, and PIN code off. The SMS message must be as Text format, can’t be identified for PDU format.

Put SIM card into card box as pictures below.

5.3 Startup

Remark:In the following SMS, "123456" is default password;     2.use space instead of "#" while sending text command via phone!

 5.3.1 Connect wire box with GPS tracker

GPS Tracker for Personal Remote Positioning Tracker with Monitoring